Tripp Lite SR42UBEXPNDNR3 Specifications

Model Number: SR42UBEXPNDNR3
42U 4-Post SmartRack Premium Open Frame Rack (no sides, doors or roof)
Description
The SR42UBEXPNDNR3 houses 3000 lb of standard 19-inch rack equipment in 42U. It is an expansion model that comes without sides, doors or
roof. The front and rear pairs of vertical rails have square mounting holes that are adjustable in quarter-inch increments from 4 to 37 inches.
Adjustment is quick and an easy-view depth index ensures consistent rail placement without requiring time-consuming measurements. Each rack
space within the enclosure is numbered for ready reference and supports tool-less button-mount 0U installation of up to four compatible PDUs and
cable managers.
All components of the SR42UBEXPNDNR3 are grounded to the enclosure frame. Front and rear threaded grounding points are provided for
connection to the facility earth ground.
To simplify deployment, the SR42UBEXPNDNR3 comes with preinstalled 3" casters that enable it to be easily maneuvered into the desired location,
where it can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for
moving the enclosure over long distances.
The SR42UBEXPNDNR3 comes with a 5-year product warranty. As part of the SmartRack family, the SR42UBEXPNDNR3 is compatible with Tripp
Lite's extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement.
Package Includes
SR42UBEXPNDNR3
Mounting Hardware
Owner's Manual
Features
Ships fully assembled for rapid deployment and roll into place on heavy-duty 3" pre-installed casters (casters are removable)
Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index
ensures consistent rail placement without requiring time-consuming measurements.
Tool-less accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable
managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can
accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).
Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws
Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.
Maximum usable internal depth of 37 inches/94 cm (front to rear rail).
Weight ratings of 3000 lb stationary and 3000 lb rolling.
Built in baying tabs allow premium open frame racks to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to
match standard data center floor tiles.
Highlights
42U SmartRack Premium open frame rack (no sides, doors or roof)
4 interior vertical posts with unthreaded square hole openings
Standard 24" (600mm) width and 42" (1050mm) depth for optimizing floor
space
Ships fully assembled
3000 lb stationary / 3000 lb rolling load capacity
Preinstalled heavy duty 3" casters and leveling feet
Rolls through standard 7 foot doorway
Includes 50 pieces of M6 cage nuts and 50 pieces of M6 screws (equipment
mounting hardware)
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com