Editing Program - American DJ Accu Spot 250 II User Instructions

Accu Spot 250 II™
EDIT
- This menu item allows you to write a program into the
memory (EEPROM) via the control panel or via the external
controller. Please see pages 33-35 for detailed instructions.
STEP
- With this function you can program the number of
steps in your individual Program.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "STEP" is displayed, press ENTER.
4. The display shows "S-01", this stands for the first step of
your program. You can call up to 48 scenes in "Run". For exam-
ple, if "S-05" is displayed, it means that "Run" will run the first
5 scenes you saved in "Edit".
5. Press ENTER to save and press MODE/ESC to exit.
SC01
- With this function you can choose the number of
scenes in your Program.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "SC01" is displayed.
4. The display shows "SC01", this stands for the first scene of
your program. You can call up to 48 scenes. For example, if
"SC05", it means that "Run" will run the first 5 scenes you saved
in "Edit".
5. Press ENTER to save and press MODE/ESC to exit.
REC
- With this function you can record the scenes auto-
matically for the external controller.
1. Access the main menu.
American DJ - www.americandj.com - Accu Spot 250 II™ Instruction Manual Page 31
®

Editing Program

Accu Spot 250 II™
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "REC" is displayed.
4. The display shows "RE.XX", "XX" stands for the scene
number in the internal memory of where your scenes from the
controller will be stored.
5. Press the UP or DOWN button to select your desired scene
number.
6. Press ENTER to confirm, and the fixture will record the
scenes from the external controller.
7. Press MODE/ESC to return to the main menu.
RUN
gram. You can set the number of steps under "STEP", and
you can edit the individual scenes under "EDIT".
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "RUN" is displayed, press ENTER.
4. Press the UP button to display "ON" to activate this function,
or "OFF" to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
STEP
steps in the Run Program.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "STEP" is displayed, press ENTER.
4. The display shows "S-01", "01" stands for the first step of
- With this function you can run your pre-made pro-
- With this function you can define the number of
American DJ - www.americandj.com - Accu Spot 250 II™ Instruction Manual Page 32
®
Editing Program