Editing Program - American DJ Accu Spot 575 User Instructions

Accu Spot 575
2.0", "V-9.9" etc.
5. Press MODE/ESC to exit.
ADJU
- Use this function is used to make sure all motors
are aligned and to adjust any motors that are not.
1. Access the main menu.
2. Tap the UP button until "SPEC" is displayed, press ENTER.
3. Tap the UP button until "ADJU" is displayed, press ENTER.
4. Tap the UP button until "CODE" is displayed, press ENTER.
5. The display will show "CXXX", were as "XXX" represents the
calibration password. The calibration password is "C050." Use
the UP or DOWN buttons to enter the proper password.
6. Once the proper password is entered the display will read
"CHXX", were as "XX" represents the fixture channel number, in
the case of the Accu Spot 575 1 ~ 16.
7. Select the desired channel to be calibrated by pressing the
UP or DOWN buttons and then ENTER to confirm.
8. The display will then read "XXXX", were "XXXX" stands for
the calibrate values.
9. Adjust the desired calibration value between –128 and 127
by pressing the UP and DOWN. As you scroll up and down
through the calibration values you will
notice slight changes in the wheel or motor you are attempting
to calibrate.
10. Once you reach your desired calibration press ENTER to
confirm and lock in your calibration.
11. Once you are completely finished press MODE/ESC to
return to the main menu.
American DJ - www.americandj.com - Accu Spot 575 Instruction Manual Page 31
®
System Menu Accu Spot 575
EDIT
memory (EEPROM) via the control panel or via the external
controller. Please see pages 32-34 for detailed instructions.
STEP
steps in your individual Program.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "STEP" is displayed, press ENTER.
4. The display shows "S-01", this stands for the first step of
your program. You can call up to 48 scenes in "Run". For exam-
ple, if "S-05" is displayed, it means that "Run" will run the first
5 scenes you saved in "Edit".
5. Press ENTER to save and press MODE/ESC to exit.
SC01
scenes in your Program.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "SC01" is displayed.
4. The display shows "SC01", this stands for the first scene of
your program. You can call up to 48 scenes. For example, if
"SC05", it means that "Run" will run the first 5 scenes you saved
in "Edit".
5. Press ENTER to save and press MODE/ESC to exit.
REC
matically for the external controller.
1. Access the main menu.
American DJ
- This menu item allows you to write a program into the
- With this function you can program the number of
- With this function you can choose the number of
- With this function you can record the scenes auto-
- www.americandj.com - Accu Spot 575 Instruction Manual Page 32
®

Editing Program