Remove The Ipod/Iphone; Usb Memory Connection (Sold Separately); Connect Usb Memory; Remove Usb Memory - Alpine CDA-137BTI Owner's Manual

Remove the iPod/iPhone

Notes
• After changing the unit to a source other than the USB iPod, remove the
iPod/iPhone. If the iPod/iPhone is removed in the USB iPod mode, data
may cause damage.
• If sound is not output or the iPod/iPhone is not recognised even when
the iPod/iPhone is connected, remove the iPod/iPhone once, then
connect it again, or reset the iPod.
• Do not leave the iPod/iPhone in a vehicle for a long time. Heat and
humidity may damage the iPod/iPhone and you may not be able to play
it again.
USB Memory Connection (sold
separately)

Connect USB Memory

This unit
USB Connector

Remove USB Memory

This unit
USB Connector
Notes
• When removing USB Memory, pull it out straight.
• If sound is not output or USB Memory is not recognized even when
USB Memory is connected, remove USB Memory once, then connect it
again.
• Change to a source other than the USB Memory mode, then remove the
USB Memory. If the USB Memory is removed in the USB Memory
mode, data may be damaged.
• Route the USB cable away from another cables.
54
-EN
USB Memory
(sold separately)
lock case
Cable (Supplied)
USB Memory
(sold separately)
Cable (Supplied)

Mounting the Microphone