Solid-State Drive - HP Envy Maintenance And Service Manual

Solid-state drive

Description
128-GB mSATA solid-state drive (SSD), MLC
128-GB SSD, TLC
24-GB mSATA solid-state drive (SSD)
Before removing the SSD, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the service cover (see
5. Disconnect the battery cable (see
Remove the solid-state drive:
1. Remove the Phillips PM2.0×2.0 screw (1) that secures the solid-state drive to the computer. The
drive tilts upwards.
40 Chapter 4 Removal and replacement procedures
Service cover on page 37).
Battery on page 39).
Spare part number
727514-001
747210-001
734247-001