Before You Begin; The Broadband Screen - ZyXEL Communications VMG4380-B10A User Manual

Figure 21 Dual Stack Lite
LAN
- IPv6
- IPv4
+
IPv6 IPv4

6.1.3 Before You Begin

You need to know your Internet access settings such as encapsulation and WAN IP address. Get this
information from your ISP.

6.2 The Broadband Screen

Use this screen to change your Device's Internet access settings. Click Network Setting >
Broadband from the menu. The summary table shows you the configured WAN services
(connections) on the Device.
Figure 22 Network Setting > Broadband
The following table describes the labels in this screen.
Table 7 Network Setting > Broadband
LABEL
Add new WAN
Interface
#
Name
Type
Mode
Encapsulation
VMG4380-B10A / VMG4325-B10A User's Guide
WAN
- IPv6
- IPv4 in IPv6
ISP (IPv6)
IPv6
IPv4 in IPv6
DESCRIPTION
Click this button to create a new connection.
This is the index number of the entry.
This is the service name of the connection.
This shows whether it is an ATM, PTM, or Ethernet connection.
This shows whether the connection is in routing or bridge mode.
This is the method of encapsulation used by this connection.
AFTR
IPv4 Internet
Chapter 6 Broadband
IPv6 Internet
79