Add/Edit An Acl Rule - ZyXEL Communications VMG4380-B10A User Manual

15.4.1 Add/Edit an ACL Rule

Click Add new ACL rule or the Edit icon next to an existing ACL rule in the Access Control
screen. The following screen displays.
Figure 107 Access Control: Add/Edit
The following table describes the labels in this screen.
Table 79 Access Control: Add/Edit
LABEL
Filter Name
Order
Select Source
Device
Source IP
Address
Select
Destination
Device
Destination IP
Address
VMG4380-B10A / VMG4325-B10A User's Guide
DESCRIPTION
Enter a descriptive name of up to 16 alphanumeric characters, not including spaces,
underscores, and dashes.
You must enter the filter name to add an ACL rule. This field is read-only if you are editing
the ACL rule.
Select the order of the ACL rule.
Select the source device to which the ACL rule applies. If you select Specific IP Address,
enter the source IP address in the field below.
Enter the source IP address.
Select the destination device to which the ACL rule applies. If you select Specific IP
Address, enter the destiniation IP address in the field below.
Enter the destination IP address.
Chapter 15 Firewall
217