ZyXEL Communications VMG4380-B10A User Manual page 30

Chapter 2 The Web Configurator
Table 3 Navigation Panel Summary (continued)
LINK
Broadband
Wireless
Home
Networking
Routing
QoS
30
TAB FUNCTION
Broadband Use this screen to view and configure ISP parameters, WAN IP
address assignment, and other advanced properties. You can also add
new WAN connections.
3G Backup Use this screen to configure 3G WAN connection.
Advanced Use this screen to enable or disable PTM over ADSL, Annex M/Annex
J, and DSL PhyR functions.
8021x Use this screen to view and configure the IEEE 802.1x settings on the
Device.
General Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
More AP Use this screen to configure multiple BSSs on the Device.
MAC Use this screen to block or allow wireless traffic from wireless devices
Authentication of certain SSIDs and MAC addresses to the Device.
WPS Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WMM Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
WDS Use this screen to set up Wireless Distribution System (WDS) links to
other access points.
Others Use this screen to configure advanced wireless settings.
Channel Use this screen to scan wireless LAN channel noises and view the
results.
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional Use this screen to configure IP alias and public static IP.
Subnet
STB Vendor ID Use this screen to have the Device automatically create static DHCP
entries for Set Top Box (STB) devices when they request IP
addresses.
5th Ethernet Use this screen to configure the Ethernet WAN port as a LAN port.
Port
Static Route Use this screen to view and set up static routes on the Device.
Policy Use this screen to configure policy routing on the Device.
Forwarding
General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Class Setup Use this screen to define a classifier.
Policer Setup Use these screens to configure QoS policers.
Monitor Use this screen to view QoS packets statistics.
VMG4380-B10A / VMG4325-B10A User's Guide