Technical Reference; Lans, Wans And The Device; Dhcp Setup - ZyXEL Communications VMG4380-B10A User Manual

Chapter 8 Home Networking
Table 38 Network Setting > Home Networking > LAN VLAN (continued)
LABEL
802.1P Mark
VLAN ID
Apply
Cancel

8.11 Technical Reference

This section provides some technical background information about the topics covered in this
chapter.
8.11.1

LANs, WANs and the Device

The actual physical connection determines whether the Device ports are LAN or WAN ports. There
are two separate IP networks, one inside the LAN network and the other outside the WAN network
as shown next.
Figure 60 LAN and WAN IP Addresses
LAN

8.11.2 DHCP Setup

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the Device as a DHCP
server or disable it. When configured as a server, the Device provides the TCP/IP configuration for
the clients. If you turn DHCP service off, you must have another DHCP server on your LAN, or else
the computer must be manually configured.
152
DESCRIPTION
Use this option to set what to do for the IEEE 802.1p priority tags when you add or remark
the tags for a LAN port's downstream traffic. Either select Unchange to not modify the
traffic's priority tags or select an priority from 0 to 7 to use. The larger the number, the
higher the priority.
If you will add or remark tags for this LAN port's downstream traffic, specify the VLAN ID
(from 0 to 4094) to use here.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
WAN
VMG4380-B10A / VMG4325-B10A User's Guide