Interface Group Configuration - ZyXEL Communications VMG4380-B10A User Manual

Chapter 13 Interface Group
In the following example, the client that sends packets with the DHCP Vendor ID option set to MSFT
5.0 (meaning it is a Windows 2000 DHCP client) is assigned the IP address 192.168.2.2 and uses
the WAN VDSL_PoE/ppp0.1 interface.
Figure 93 Interface Grouping Application
DHCP Vendor ID option: MSFT 5.0
Click Network Setting > Interface Group to open the following screen.
Figure 94 Network Setting > Interface Group
The following table describes the fields in this screen.
Table 69 Network Setting > Interface Group
LABEL
Add New
Interface Group
Group Name
WAN Interface
LAN Interfaces
Criteria
Modify
Add

13.2.1 Interface Group Configuration

Click the Add New Interface Group button in the Interface Group screen to open the following
screen. Use this screen to create a new interface group.
200
Default: ETH 2~4
192.168.1.x/24
192.168.2.x/24
DESCRIPTION
Click this button to create a new interface group.
This shows the descriptive name of the group.
This shows the WAN interfaces in the group.
This shows the LAN interfaces in the group.
This shows the filtering criteria for the group.
Click the Delete icon to remove the group.
Click this button to create a new group.
eth10.0
VDSL_PoE/ppp0.1
VMG4380-B10A / VMG4325-B10A User's Guide
Internet