ZyXEL Communications VMG4380-B10A User Manual page 282

Chapter 35 Diagnostic
Note: This screen is available only when you configure an ATM layer-2 interface.
Figure 151 Maintenance > Diagnostic > OAM Ping Test
The following table describes the fields in this screen.
Table 113 Maintenance > Diagnostic > OAM Ping Test
LABEL
F4 segment
F4 end-end
F5 segment
F5 end-end
282
DESCRIPTION
Select a PVC on which you want to perform the loopback test.
Press this to perform an OAM F4 segment loopback test.
Press this to perform an OAM F4 end-to-end loopback test.
Press this to perform an OAM F5 segment loopback test.
Press this to perform an OAM F5 end-to-end loopback test.
VMG4380-B10A / VMG4325-B10A User's Guide