Section 8 Setting Up - Unix; Installation In The Unix Environment - Axis 540 User Manual

Section 8 Setting Up - UNIX

Installation in the UNIX Environment

AXIS 540/640 User's Manual
Having performed the basic TCP/IP setup procedures as defined in
Section 3 Basic Installation, you are now able to print in interactive
mode using FTP or Reverse Telnet protocols.
However, should you require to integrate the AXIS 540/640 into your
host spooler you will now need to use the Axis automatic installation
script axinstall. This utility software is resident on the AXIS 540/640*
but can also be uploaded to your host using FTP, so no disks or tapes
are required. Having completed this operation, the printer connected
to the AXIS 540/640 will appear as though they are directly connected
to the host printer spooler.
If you intend to operate your AXIS 540/640 in a multiprotocol
environment, you should also proceed according to one or more of the
following sections, as appropriate to your network.
Section 4 Setting Up - NetWare
Section 5 Setting Up - Windows
Section 6 Setting Up - OS/2
Section 7 Setting Up - Macintosh
Section 9 Web Based Management
Section 8: Setting Up - UNIX
U U NIX
85