Audi S5 Owner's Manual page 75

document_0900452a81793dcc.book Seite 73 Mittwoch, 21. März 2007 5:42 17
Recalling settings
– If the driver's door is open, press the desired recall
button briefly.
– If the driver's door is closed, press and hold down the
desired recall button until the programmed settings are
reached.
A tone will sound and the diode in the
fig. 73 will light up to confirm that the settings have been stored.
When you lock the vehicle the current settings are automatically
stored and assigned to the remote control key. However, the
settings assigned to the remote control key will not overwrite the
settings stored on recall buttons 1 and 2. The settings stored on the
recall buttons can be called up at any time. When you unlock the
vehicle, the settings assigned to the remote control key are recalled
automatically.
If your vehicle is also driven by other persons using your remote
control key, it is advisable to store your personal settings on one of
the recall buttons. You can then recall your own settings at any time
simply by pressing the corresponding recall button. When you lock
the vehicle these settings are then stored automatically and
assigned once again to the remote control key.
WARNING
For safety reasons, never recall seat settings when the vehicle
is moving - this could lead to an accident.
In an emergency the recall function can be stopped at any time
by pressing the ON/OFF switch, or by briefly pressing any of the
recall buttons.
Controls
Applies to vehicles: with seat memory
Activating memory for remote control key
The relevant function must be activated on the sound
system or MMI so that the settings stored in the memory
can be recalled using the remote control key.
button ⇒ page 72,
SET
– Select: Function selector button
Safety Driving tips General maintenance
Seats and storage
CAR
> Driver's seat > Remote control key > on.
Self-help
73
Fig. 74 MMI display:
Driver's seat
> Seat adjustment
Technical data