Audi S5 Owner's Manual page 15

document_0900452a81793dcc.book Seite 13 Mittwoch, 21. März 2007 5:42 17
The button has the following functions:
SET
Activating clock, date, temperature and mileage
recorder displays
The display will appear for about 30 seconds if you press the
button ⇒ page 12, fig. 3 when the ignition is switched off.
Starting check procedure (auto-check control)
The auto-check control checks important components and vehicle
systems. These background checks are run constantly, as long as
the ignition is switched on ⇒ page 29.
You can start the "check procedure" manually by pressing the
button with the ignition switched on. This function check can be
started at road speeds up to 5 km/h.
Calling up driver messages again
A red or yellow symbol appearing in the instrument cluster display
is normally accompanied by a corresponding message. The
message will disappear from the display after about 5 seconds. If
required, you can call up the message again by briefly pressing the
button.
SET
Setting speed warning
You can press the SET button briefly to set speed limit warning 1
while the vehicle is moving ⇒ page 28. If you press and hold the
button, this will cancel the speed warning.
SET
Controls
Time and date display
SET
SET
Quartz clock
The date, time and display format can be changed using the sound
system or MMI* control console. Please refer to the Operating
Manual for the MMI or sound system for more details.
Radio-controlled clock*
When the clock is in "radio-control" mode the signal reception
symbol (a radio tower with radio waves) appears in the display
⇒ fig. 4. It is then not possible to change the minutes or the date
manually.
for about 30 seconds when the driver's door is opened.
be switched on for about 30 seconds by pressing the
⇒ page 12, fig. 3 ⇒ page 12.
Safety Driving tips General maintenance
Instruments and warning/indicator lamps
Note
The digital clock and mileage recorder displays are switched on
When the ignition is switched off, the clock and date display can
Self-help
13
Fig. 4 Instrument
cluster: Time and date
display
SET button
Technical data