Driving; Steering; Ignition Lock - Audi S5 Owner's Manual

document_0900452a81793dcc.book Seite 114 Mittwoch, 21. März 2007 5:42 17
114

Driving

Driving

Steering

Applies to vehicles: with manually adjustable steering column
Adjusting the steering wheel position
The height and reach of the steering wheel can be
adjusted as required to suit the driver.
– Pull the lever ⇒ fig. 130 -arrow- ⇒
– Move the steering wheel to the desired position.
– Then push the lever towards the steering column until
the catch engages.
WARNING
Never adjust the position of the steering wheel when the
vehicle is moving - this could cause an accident.
For safety reasons, the lever must be pushed securely against
the steering column to prevent the steering wheel from acciden-
tally changing position while driving (accident risk).

Ignition lock

Starting the engine with the key
The ignition key is used to start the engine.
Fig. 130 Lever beneath
– Insert the key into the ignition lock.
steering column
– Manual gearbox: Press the clutch pedal all the way down
up.
and move the gear lever into neutral.
– Automatic gearbox: Press the brake pedal and move the
selector lever to position P or N.
– Press in the key ⇒ fig. 131 to start the engine.
If you press in the key without pressing the clutch or brake pedal,
the ignition will be switched on or off. The steering lock is released
when the ignition is switched on.
The key can be removed only when the ignition is off. The key has to
be pressed in briefly to switch off the ignition. On vehicles with an
automatic gearbox, the selector lever has to be in position P.
Electrical components with a high power consumption are switched
off temporarily while you start the engine.
Fig. 131 Ignition key