Compact Temporary Spare Wheel - Audi S5 Owner's Manual

document_0900452a81793dcc.book Seite 246 Mittwoch, 21. März 2007 5:42 17
246 Self-help
If you need the tools, the Tyre Mobility System or the jack*, you will
have to open the floor panel and take out the spare wheel*
⇒ page 246.
The tool kit includes:
A hook for removing hub caps
Pin for mounting a wheel
Screwdriver with reversible blade
Tool for changing bulbs
Interchangeable socket (Torx socket for changing bulbs)
Crank handle for jack
Adapter for anti-theft wheel bolts*
Jack*
Box spanner for wheel bolts
Towline anchorage
Some of the parts listed are only fitted on certain models or are
optional extras.
Before stowing the jack* again, wind down the arm of the jack as far
as it will go.
WARNING
Do not use the hexagonal socket in the screwdriver handle to
tighten the wheel bolts. It is not possible to tighten the bolts with
the required torque – risk of accident.
The jack supplied by the factory is only designed for changing
wheels on this model. On no account attempt to use it for lifting
heavier vehicles or other loads – risk of injury.
Never start the engine when the vehicle is on the jack - risk of
accident.
If work has to be done under the vehicle, ensure that it is safely
supported on stands designed for the purpose, otherwise there is
a risk of injury.
Applies to vehicles: with compact temporary spare wheel

Compact temporary spare wheel*

The spare wheel is carried in the wheel well under the
floor panel in the luggage compartment. It is only
intended for temporary use over short distances.
Taking out the spare wheel
– Lift the floor panel by the plastic handle ⇒ fig. 226.
– Hook the handle onto the luggage compartment weath-
erstrip.
– Turn the centre plastic knob ⇒ fig. 226 anti-clockwise.
– Take out the spare wheel.
– Unhook the floor panel before closing the boot lid.
Securing the defective wheel in the spare wheel
well
– Place the wheel in the spare wheel well and secure it with
the plastic knob.
– Unhook the floor panel before closing the boot lid.
Fig. 226 Spare wheel