Table of Contents

Advertisement

document_0900452a81793dcc.book Seite 68 Mittwoch, 21. März 2007 5:42 17
68
Lights and vision

Digital compass

Applies to vehicles: with digital compass
Activating and deactivating the compass
The compass direction will appear in the mirror.
– To switch the compass on and off, press and hold
A
button
until the compass display in the mirror
A
⇒ fig. 69 appears or disappears.
The digital compass only works when the ignition is on. The points
of the compass are displayed as follows: N (North), NE (North East),
E (East), SE (South East), S (South), SW (South West), W (West), NW
(North West).
Note
To avoid inaccurate compass readings, do not hold any remote
controls or other electrical devices or metal objects near the interior
mirror.
Applies to vehicles: with digital compass
Setting the correct compass calibration zone
The correct compass calibration zone must first be set
before the compass can give an accurate reading.
Fig. 69 Interior mirror:
activated digital
compass
Fig. 70 Map of compass calibration zones
– Press and hold button
zone number is displayed on the interior mirror.
– Press button
appears. The adjustment mode will be ended automati-
cally after a few seconds.
A
⇒ fig. 69 until the currently set
A
A
repeatedly until the correct zone number
A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents