Operating Environment - Axis 5800 User Manual

Section 4 Basic Installation (Cable & Wireless)
24
Methods for setting
the IP Address
You can set the IP address of your AXIS 5800+ Mobile using
one of the following methods, depending on your network

operating environment:

Method
AXIS IP
JumpStarter
DHCP*
ARP
RARP*
BOOTP*
Auto-IP*
* The IP address of the print server will be set automatically
using these methods.
Notes:
• The ARP and RARP methods operate on single network segments
only, that is they cannot be used over routers.
• The ability to set the IP address with ARP and PING will only be
enabled the first 4 minutes after rebooting the print server
• Refer to Setting Parameters, on page 74 for information about
setting the IP address in the Macintosh environment.
AXIS 5800+ Mobile User's Manual
Network environments
Windows
95/98/NT/Me/2000/XP
Windows NT/Me
2000/XP, UNIX, NetWare
Windows
95/98/NT/Me/2000/XP
UNIX/Mac OS X
UNIX
UNIX, NetWare
Windows 98/ME/2000/XP
See ...
Set the IP address using AXIS IP
JumpStarter, on page 28
Setting the IP address using DHCP,
on page 29
Setting the IP address Using ARP in
Windows, on page 31
Using ARP in UNIX and Mac OS X, on
page 32
Using RARP in UNIX, on page 33
Using BOOTP in UNIX, on page 34
Setting the IP address using Auto-IP,
on page 30