Axis 5800 User Manual page 117

AXIS 5800+ Mobile User's Manual Section 11 Management and Configuration
117
Character Set A common problem in a multiple host environment is that
Conversion different hosts use different ASCII character sets. As a result of
this, language specific characters (such as å ü ô ñ) are sometimes
printed incorrectly.
The AXIS 5800+ Mobile solution to this problem is to assign a
character set conversion filter to a logical printer, and then link
that logical printer to the host causing the problem.
You select your desired conversion filter by setting the
Character Set Conversion (PRx_CSET) parameter. The output
from the conversion filter is always IBM PC Set 2 (Code Page
437), and this is the character set the printer must be set up for.
Example:
Your network contains a host using the character set ISO 8859-2
and a host using the character set DEC. In order to direct their
print jobs to the printer connected to the AXIS 5800+ Mobile,
you should assign each host to a separate logical printer, and
install a character set conversion filter.
Follow the instructions below to change the conversion filter:
1. From the print server's internal web page, select Admin | Logical
Printer Settings.
2. Select the PR1 tab.
3. Set the parameter Physical Port to LPT1.
4. Set the parameter Character Set Conversion to ISO>IBM.
5. Click the OK button.
6. Select the Printer2 tab.
7. Set the parameter Physical Port to LPT1.
8. Set the parameter Character Set Conversion to DEC>IBM.
9. Click the OK button.