Test Button; Section 13 Test Button - Axis 5800 User Manual

144

Section 13 Test Button

Section 13
The Test Page
The Parameter List

Test Button

The test button is located on the front right hand side of the AXIS
5800+ Mobile and is used for:
• Printing a test page, checking the connection to the printer.
• Printing a parameter list, showing the AXIS 5800+ Mobile cur-
rent settings.
• Resetting the AXIS 5800+ Mobile parameters to the factory
default settings.
Press the test button once to print a test page. The printed test page
contains basic information about the AXIS 5800+ Mobile. It is
recommended that you print a test page every time you have
connected the AXIS 5800+ Mobile to a printer.
Note:
• The test page is printed on LPT1 by default. If you want to print
the test page on LPT2, you should set the Internal Printout
Destination parameter to LPT2 from the internal web pages
under admin | General Settings | General.
Press the test button twice to print a parameter list showing the
current AXIS 5800+ Mobile settings. This list provides comprehensive
details of all the parameters and their current status. Refer to
15 - Parameter List, on page 151.
If you want to change any of the parameters, use one of the methods
that are described in Section 11 Management and Configuration, on
page 102.
Note:
• The parameter list is printed on LPT1 by default. If you want to
print the parameter list on LPT2, you should set the Internal
Printout Destination parameter to LPT2 from the internal web
pages under admin | General Settings | General.
AXIS 5800+ Mobile User's Manual