Clear Song Style (User Song Style) - Generalmusic WK2000 SE Owner's Manual

owners manual
If the Song Style is not to your satisfaction, it is possible to intervene by cancelling some parameters by means of the
CLEAR function The CLEAR function is incorporated within the RECORD operations.
•
Hold down the RECORD button for a few seconds to gain access to
the CLEAR function. The display shows several Clear options which you
can now select with the PAGE buttons.
Clears (initializes) all the recorded events of the SONG STYLE, except the last programmed
1 ALL Performance. In practice, only the recorded sequences are cancelled from the last
recorded Song Style
When the CHORD track is empty, the word [CHORD] in the display starts to fl ash
(indicating that it is ready to record chord events). The Chord track can be recorded only
2 CHORD
the fi rst time; if you want to record the chord track again (to cancel wrong events), you
must clear the entire track with Clear CHORD.
3 LOWER Cancels track 7
4 UPPER 2 Cancels track 8
5 UPPER 1 Cancels track 9
6 PAD Cancels all Pad events
7 TEMPO Cancels all Tempo events captured in the Tempo track
The Common track records all events generated by the panel interventions effected
8 COMMON during the recording (changes of Var, Fill, etc.). Clear Common cancels all these type of
events from the recording
To cancel, it is suffi cient to select the desired event type with the PAGE
buttons, press ENTER once and confi rm again with ENTER.
Your recorded Song Styles remain intact in memory even after power down. Nevertheless, to avoid unwanted cancellation, it
is better to save them to disk (using the Save All command) for future use. It is also possible to carry out the CLEAR operation
on USER SONGS and USER STYLES.
The songs

Clear Song Style (User Song Style)

wk2000 se
Page37