Single Touch Play; Performance Recall/Store Performance; Style/Tempo Lock - Generalmusic WK2000 SE Owner's Manual

owners manual
FREESTYLE
A three note chord is recognized anywhere on the keyboard, even if
played above the current split point. If you play one or two notes, the
chord is not recognized and the accompaniment does not change. This
chord recognition option allows you to play your melody anywhere
along the keyboard with the Upper 1 and /or Upper 2 keyboard sounds.
Selecting FREESTYLE disables the Lower keyboard section, if active. Use
the following procedure to select the desired chord recognition option
Press the Cursor buttons as many times as necessary until the arrowhead is
1
next to the ARR.MODE menu function. The display shows the current chord
recognition mode in large letters
2 Press the PAGE buttons repeatedly to scroll
SINGLE TOUCH PLAY - STORE PERFORMANCE - PERFORMANCE RECALL - STYLE/TEMPO LOCK

Single Touch Play

The SINGLE TOUCH PLAY button assigns the factory set sounds stored
in ROM to all the tracks (accompaniment as well as keyboard) for each
Style/ In addition, this button activates the ARRANGE ON/OFF button
(LED on) and the ARRANGE MEMORY function (corresponding display
indicator on).
When SINGLE TOUCH PLAY is off, selecting Styles recalls only the Style
accompaniment sections without changing the keyboard sounds.
The ON/OFF status of the SINGLE TOUCH PLAY button is shown in the
display by the corresponding indicator (S.T.PLAY).
With SINGLE TOUCH PLAY ON, the function buttons (F1/F9) also recall
10 SINGLE TOUCH PLAY (1 S. T. P . button + 9 F1/F9 function buttons)
panel settings for the Real Time keyboard sections.

Performance Recall/Store Performance

This twin action button allows you select Performances, and to save all
modifi cations to the current Performance or to a different one. As already
explained, a Performance memorize various parameters that you can
change at will. If you hold down the STORE PERFORMANCE for a few
seconds then reply to the Performance store confi rmation request [?] with
ENTER, all the modifi cations carried out up to that moment are memorised
to the PERFORMANCE. If you want to maintain the .old. Performance as
well as the new one, rotate the DIAL before pressing ENTER, and select a
different location. The Performance number appears in the 3 digit display
area only after activating the STORE PERFORMANCE command.
The PERFORMANCE RECALL/STORE PERFORMANCE button also allows quick access to the PERFORMANCE function. If you
press and hold this button for about 2 seconds, the arrowhead goes directly next to the [PERF] menu function and sets the
instrument to Performance mode (without using the cursor buttons).
Note: In SONG and SONG STYLE modes, pressing STORE PERFORMANCE only displays the number of the selected destination
(without showing the letter [P]).

Style/tempo Lock

The STYLE LOCK function allows you to select Performances without
changing the current Style. With STYLE LOCK active (corresponding display
indicator on), you can pass from one Performance to another without
changing the Style. If you hold down this button for about 2 seconds, the
TEMPO LOCK function activates (as already explained). TEMPO LOCK
and STYLE LOCK can both be active at the same time. Activation of the
TEMPO LOCK function is displayed by the alternate fl ashing of the Tempo
setting with the word [LOC]. This function maintains the current Tempo
setting for all Style and Performance changes. When off, selecting a Style
or Performance also recalls the memorised tempo setting.
Page22
wk2000 se
Styles