Table of Contents
Advertisement
Wireless Broadband Router
4.6.2 FTP Private Port
FTP private port enables user to setup FTP server which is not using the standard port 21.
Check port number and enter the number and then press the "Apply" button to setup Private FTP port.
The default Value is 1025.
4.6.3 Virtual Server Setup
Use the Virtual Server function when you want different servers/clients in your LAN to handle different
service/Internet application type (e.g. Email, FTP, Web server etc.). Computers use port numbers to
recognize a particular service/Internet application type. The Virtual Server allows you to re-direct a particular
service port number (from the Internet/WAN Port) to a specified LAN private IP address and its service port
number.
Rule Name: Define a name for this rule. It's just a string.
Internal Server IP: Enter the host IP address to which the packet will be forwarded. The virtual server
can be set easily by setting the internal server IP address only. You need to give your LAN PC clients a
fixed/static IP address for Virtual Server to work properly.
Protocol: Chose TCP/UDP type for the packet you want to forward. If the rule existed in predefined
virtual server rule, you can choose the rule.
External Port: Enter the port number (The value's range is 1 to 65535) from which the packet will be on
WAN.
Internal Port: Enter the port number to which the packet will be forwarded on LAN
Press "Add" button after enter the all fields to add the rule.
Check to select the rule and press "Delete" to delete the rule.
Page 39 of 47
User manual
Advertisement
Table of Contents
