Wds - Planet WRT-416 User Manual

Wireless Broadband Router
Enable Wireless Access Control: To enable Wireless MAC Filter, select the checkbox in front of
"Enable Wireless Access Control", then click the "Apply " button. The default is "disable".
You can choose a default operation for your factual security or management consideration:
Defined items in MAC list are PERMIT to connect AP, others are DENIED.
Defined items in MAC list are DENIED to connect AP, others are PERMIT.
Click "Apply" when you have selected,
MAC: Enter the MAC Address of a station.
Description: Enter the Comment of station.
Click "Add", then this wireless station will be added into the" Current Access Control List" below.
If you want to remove some MAC address, select them from the list and then click "Delete ".

4.4.4 WDS

You can set the wireless Bridge MAC here. This mode is used to connect two or more WRT-416 or
WAP-4036 wirelessly.
Wireless Bridge MAC: If the operating mode of your WRT-416 is "WDS" or "AP+WDS", you should
have a setting in Wireless Bridge MAC. Enter the MAC address of target access point. Moreover, the
target access point must be "WDS" or "AP+WDS" as well.
Description: Enter the Comment of station.
Current Wireless Bridge Information: You can see the basic information of all wireless bridge devices.
And you can delete any wireless bridge in the list.
Page 35 of 47
User manual