Table of Contents
Advertisement
Wireless Broadband Router
4.5 Routing
If the Router is connected to more than one network, it may be necessary to set up a static route between
them. A static route is a pre-determined pathway that network information must travel to reach a specific host
or network.
Type / Target / Mask / Gateway: Fill in these fields required by this Static Routing function.
Add: Fill in the all of the setting to be added and click "Add", then this Special Application setting will be
added into the "Current Routing Table" below.
Current Routing Table: This display shows the valid routing paths in Broadband Router. User can view
the information about current routing paths
If you want to remove some route entries from the "Current Routing Table ", select the Route entry you
want to remove in the table and then click "Delete ".
4.6 NAT
Network Address Translation (NAT) allows multiple users at your local site to access the Internet through a
single Public IP Address. NAT provides Firewall protection from hacker attacks and has the flexibility to allow
you to map Private IP Addresses to Public IP Addresses for key services such as Websites and FTP.
Page 37 of 47
User manual
Advertisement
Table of Contents
