Planet WRT-416 User Manual page 26

Wireless Broadband Router
WAN IP Address: This is the Router's IP address, when seen from the Internet. Your ISP will provide
you with the IP Address you need to specify here.
Subnet Mask: This is the Router's Subnet Mask, as seen by users on the Internet (including your ISP).
Your ISP will provide you with the Subnet Mask.
Default Gateway: Your ISP will provide you with the Gateway Address, which is the ISP server's IP
address.
Physical Address Clone: Your ISP may require a particular MAC address in order for you to connect to
the Internet. This MAC address is the PC's MAC address that your ISP had originally connected your
Internet connection to. Type in this MAC address in this section to replace the WAN MAC address with
the MAC address of that PC (you have to be using that PC for the Clone MAC Address button to work).
MTU: MTU is the Maximum Transmission Unit. It specifies the largest packet size permitted for Internet
transmission. Enter your MTU number in the text-box to set the limitation. The recommended size,
entered in the Size field, is 1496. You should leave this value in the 1200 to 1500 range.
DNS: Check "DNS" and enter the IP address to specify DNS server for LAN DHCP server.
Click "Apply" to save these settings with the Router. The System will apply the new settings and start
rebooting right away. After reboot, the Wireless Router will enable these settings with the Router.
Page 26 of 47
User manual