Checking Pc's Ip And Connection With The Router - Planet WRT-416 User Manual

Wireless Broadband Router

3.3 Checking PC's IP and Connection with the Router

After configuring the TCP/IP protocol, use the ping command to verify if the computer can communicate with
the Router. To execute the ping command, open the DOS window and PING the IP address of the Wireless
Broadband Router at the DOS prompt:
For Windows 98/Me: Start -> Run. Type "command" and click OK.
For Windows 2000/XP: Start -> Run. Type "cmd" and click OK.
At the DOS prompt, type the following command:
If the Command window returns something similar to the following:
Then the connection between the router and your computer has been successfully established.
If the computer fails to connect to the router, the Command window will return the following:
Page 17 of 47
User manual