Table of Contents
Advertisement
Wireless Broadband Router
Chapter 4 Web Configuration
Web configuration provides a user-friendly graphical user interface (web pages) to manage your WRT-416.
An AP with an assigned IP address (e.g. http://192.168.1.1) will allow you to monitor and configure (via web
browser e.g., MS Internet Explorer or Netscape).
1. Open your web browser.
2. Enter WRT-416 IP address (default IP address is http://192.168.1.1) into the address field of the web
browser. Please also make sure your PC's IP address is in the same IP range with WRT-416.
If the router's LAN port has been changed with new IP address, enter the new IP address instead.
3. A User Name and Password dialog box will appear. Please enter your User Name and Password here.
The User Name and Password are "guest" by default. Click "OK" the management page.
Don't forget to change the Password in configuration's Authentication to ensure the security. When
first configuring your router, it is recommended that you have an Ethernet cable connected to the router.
Performing the INITIAL configuration using a wireless connection is not secure and is not recommended.
After you have finished the initial configuration of the router, your connection will be secure and you can
safely use either a wired or wireless connection.
On every page of the Wireless Router, the left navigation bar shows the main options to configure the
system. In the right navigation screen is the summary of system status for viewing the configurations.
You can usually get context sensitive help by clicking on the Help link at the top right of the page.
To apply any settings you've altered on any page, click the Save button. Otherwise you change
settings would be lost after the Router reboot.
Page 19 of 47
User manual
Advertisement
Table of Contents
