Rear Panel - Alto S-16 User Manual

4.17 REAR PANEL

-. AC INLET & FUSE HOLDER
Use it to connect your S-16 to the Main AC with the supplied AC
cord. Please check the Voltage available in your Country and
how the Voltage for your S-16 is configured before attempting to
connect your S-16 to the Main AC.
-. POWER
This switch is used to turn the Main Power ON and OFF.
-. PHANTOM
This switch will apply +48 Volt Phantom Power only to the 8 XLR
microphone inputs. Never connect microphones when the Phantom
Power is on already.
-. MAIN MIX OUTPUT
This stereo output is supplied both with XLR
and 1/4" jack socket and it is controlled by the
Main Mix Level on the front panel. It will send
the audio signal to an amplifier. The output level
can be varied from -
-. ALT OUTPUT
These 1/4" sockets are unbalanced outputs. They
are capable of delivering +22dBu into the load.
Level to the ALT OUTPUT is adjusted by ALT 3-4
rotary knob on the front panel.
-. MAIN OUTPUT LEVEL
When depress the switch, the output level from MAIN MIX OUTPUT will be reduced 30dB.
37
38
2
39
to +10dB.
40
41
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
REPLACE WITH THE SAME TYPE FUSE AND RATING
WARNING: SHOCK HAZARD
- DO NOT OPEN
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE
AVIS: RISQUE DE CHOC ELECTRIQUE
- NE PAS OUVRIR
MAIN MIX OUTPUT (BALANCED)
RIGHT LEFT
2 1 2 1
3 3
39
14
38 2
POWER PHANTOM
ON
OFF
Apparaten skall anslutas
fuse fuse 250V 250V a a with with only only Use Use
fuse 250V a with only Use till jordat uttag nar den
ansluts till ett natverk
AC INPUT
EUROPE
210-240V 50Hz
Fuse:T250mAL
RATED POWER CONSUMPTION: 35W
USA / Canada
100-120V 60Hz
Fuse:T500mAL
CAUTION:
MODEL
SERIAL
MAIN OUTPUT
+4dBu
RIGHT LEFT RIGHT(4)
MIC
MAIN
OUTPUT
LEVEL
41
37
UK / Aust
240V 50Hz
Fuse:T250mAL
ALT OUTPUT
LEFT(3)
40