TracVision R6DX User's Guide
Chapter 4 - Setup
Step 1 - Set the Operating Mode in the Antenna
28
Follow the steps in Figure 13 to set up the antenna for your selected
DISH Network operating mode. Then keep the antenna turned on for
the next step.
NOTE: If the status screen does not show "SYSTEM NEEDS SETUP,"
follow the steps in
"Resetting the System to Change Setup" on page
Figure 13 DISH Network Setup
TRACKING DTV 101
SYSTEM NEEDS SETUP
SERVICE= DIRECTV?
CHANGE
ACCEPT
SERVICE= DISH?
CHANGE
ACCEPT
MODE= DISH 1000/129?
CHANGE
ACCEPT
MODE= DISH 1000/61?
CHANGE
ACCEPT
MODE= DISH 500?
CHANGE
ACCEPT
INSTALLING DISH SATS
RESTARTING ANTENNA
Press any button
to begin.
Press CHANGE until
desired mode displays;
then press ACCEPT.
Displays satellites
installed for the
selected mode
35.