Upgrade Succeeded; Upgrade Failed - ATEN CS1762A User Manual

Upgrade Succeeded

After the upgrade has completed, a screen appears to inform you that the
procedure was successful:
Click Finish to close the Firmware Upgrade Utility.
After a successful completion, the CS1762
Upgrade Mode, and resets itself.

Upgrade Failed

If the Upgrade Succeeded screen doesn't appear, it means that the upgrade
failed to complete successfully, in which case you should do the following:
1. Power off the CS1762
2. Invoke Firmware Upgrade Mode by holding down the front panel Mode
Selection pushbutton (see Components, page 6) and power on the
CS1762 / CS1764
A
3. Do the firmware upgrade procedure again.
/ CS1764 by removing the power jack.
A A
. The orange LEDs flash together.
A
Chapter 6. The Firmware Upgrade Utility
/ CS1764 exits Firmware
A A
37