ATEN CS1762A User Manual page 17

No. Component
1 USB 2.0
Hub
2 Console
Port Section
3 KVM Port
Section
4 Power Jack
USB peripherals (printers, scanners, etc.) can plug into this/
these port(s) (this may require an extra power adapter).
CS1762 – The cables from your DVI monitor, speakers, and
A
microphone plug in here. Each connector is marked with an
appropriate icon to indicate itself.
Note: The CS1762
A
mouse ports are located on the unit's front panel.
CS1764 – The cables from your DVI monitor, USB
A
keyboard, USB mouse, speakers, and microphone plug in
here. Each connector is marked with an appropriate icon to
indicate itself.
The cables that link the switch to your computers plug in
here. Each KVM port section is comprised of a microphone
jack, speaker jack, USB type B socket and a DVI connector.
The power adapter cable plugs into this jack.
Chapter 1. Introduction
Description
's console USB keyboard and USB
9