Setting Remote Control Codes - Yamaha RX-V661 Owner's Manual

■ Selecting a component to be controlled
You can select a component to be controlled
independently of the input source selected with the input
selector buttons.
SELECT k / n repeatedly to select the
Press
desired component.
The name of the component to be controlled appears in the
display window ( ) on the remote control.
SELECT
■ Controlling optional components
(Option mode)
"OPTN" is an optional component control area that can be
programmed with remote control functions independently
from any input source. This area is useful for
programming commands that are to be used only as a part
of a macro function or for components that do not have a
valid remote control code.
To select the option mode, press
n repeatedly until "OPTN" appears in the display
window ( ) on the remote control.
SELECT
Note
You cannot set a remote control code for the optional area. See
page 87 to program buttons operated within this component
control area.

Setting remote control codes

You can control other components by setting the
appropriate remote control codes. Codes can be set up for
each input area. For a complete list of available remote
control codes, refer to "List of remote control codes" at
the end of this manual.
The following table shows the default component
(Library: component category) and the remote control
code for each input area.
Remote control code default settings
Input area
PHONO
MULCH CH
IN
V-AUX/
DOCK
SELECT k /
TUNER
MD/CD-R
CD
DTV/CBL
DVR
VCR
DVD
Note
You may not be able to operate your Yamaha component even if a
YAMAHA remote control code is preset as listed above.
In this case, try setting another YAMAHA remote control code.
1
Set the operation mode selector to
button ( ),
you want to set up.
Library
(component Manufacturer
category)
TV
DVD YAMAHA
LD YAMAHA
TAPE YAMAHA
TUNER YAMAHA
TUNER YAMAHA
CD-R YAMAHA
CD YAMAHA
TV
DVR YAMAHA
VCR
DVD YAMAHA
SOURCE and then press an input selector
or
to select the input area
PHONO MULTI CH IN
AMP
V - AUX/DOCK TUNER
SOURCE
TV
DTV/CBL
Remote control features
Default
code
– –
2100
2200
2700
2606
2602
2400
2300
– –
2807
– –
2100
MD/CD-R CD
DVR VCR DVD
85
En