Using Set Menu - Yamaha RX-V661 Owner's Manual

Using SET MENU

Use the remote control to access and adjust each
parameter.
y
• You can change the "SET MENU" parameters while this unit is
reproducing sound.
• Press RETURN to return to the previous menu level.
1
Set the operation mode selector to
and then press SET MENU to enter "SET
MENU".
The top "SET MENU" display appears in the OSD.
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
.A;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
2
k / n to select "MANUAL SETUP"
Press
and then ENTER to enter "MANUAL
SETUP".
The "MANUAL SETUP" display appears in the
OSD.
MANUAL SETUP
. 1 SOUND MENU
2 INPUT MENU
3 OPTION MENU
[ ]/[ ]:Up/Down
[ENTER]:Enter
3
Press
ENTER to select and enter the desired
menu.
The following displays are examples where "SOUND
MENU" is selected.
MANUAL SETUP
1 SOUND MENU
. A)SPEAKER SET
AMP
B)SPEAKER LEVEL
C)SP DISTANCE
D)EQUALIZER
E)LFE LEVEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
4
Press
ENTER to select and enter the desired
submenu.
The following display is an example where "LFE
LEVEL" is selected.
5
Press
and then
settings.
6
Press
MENU".
Customizing this unit (MANUAL SETUP)
k / n repeatedly and then press
MANUAL SETUP
1/2 1 SOUND MENU
. F)DYNAMIC RANGE
G)AUDIO SET
H)HDMI SET
I)EXTD SUR.
[ ]/[ ]:Up/Down
[ENTER]:Enter
k / n repeatedly and then press
SOUND MENU
E)LFE LEVEL
. SPEAKER;;;;;;0dB
HEADPHONE;;;;0dB
[ ]/[ ]:Up/Down
[
[ ]/[ ]:Adjust p
k / n to select the desired parameter
l / h to change the parameter
SET MENU to exit from "SET
2/2
69
En