Setting The Number Of Antennas; Switching To Radio Mode; Selecting Static/Dynamic Radio Mode (Fm Only) - Blaupunkt BREMEN MP76 Operating And Installation Manual

Radio mode

Setting the number of antennas

This device is equipped with two RDS radio
receivers (TwinCeiver). You can connect
one or two antennas to the device. If two
antennas are used (strongly recommend-
ed, the second antenna is part of the scope
of delivery) a directional receiption of the
station being received is possible in DDA
radio mode. In most cases, the directional
receiption signifi cantly improves the recep-
tion quality.
Note:
To ensure proper functioning of the
tuner, the main antenna must be con-
nected to the bottom antenna socket.
To set the number of antennas,
u press the MENU button 9.
Press the softkey 5 with the display
u
label "TUNER".
u Press the softkey 5 with the display
label "ONE ANTE" if one antenna is con-
nected to the device.
Or
u Press the softkey 5 with the display
label "TWO ANTE" if two antennas are
connected to the device.
u Press the OK joystick 8 or the MENU
button 9 to exit the menu.
The settings are saved.
16

Switching to radio mode

If the device is in the operating modes CD/
MP3 or CD changer/Compact Drive,
press the TUNER button =.
u
The basic radio menu for selecting the sta-
tion is displayed. The functions of the radio
mode are controlled via the radio function
menu. You reach the radio function menu
by pressing the TUNER button = again in
radio mode.
Selecting static/dynamic radio
mode (FM only)
You can select from two modes for FM radio
mode:
Static radio mode
("PRESETS" and "DDA")
In the static radio mode, four memory banks
(FM1, FM2, FM3 and FMT) are available in
FM mode. You can store six stations in each
of these memory banks. The receiving unit
automatically adjusts the best receivable
frequency of the station for each of the
stored stations.
PRE mode (static)
If you connected only one antenna to the
device and set it up in the setup menu (see
"Setting the number of antennas"), the de-
vice plays back the confi gured station with
one tuner and searches for the best fre-
quency of the adjusted station with the sec-
ond tuner (with activated RDS function).