Mute; Sound Setting; Microphone Announcements; General - Blaupunkt CBA 47 Operating And Installation Instructions

Volume adjustment and sound setting

Mute

Cockpit area
To mute the volume
briefl y press the ON/OFF button 1.
u
To cancel muting
u briefl y press the ON/OFF button 1
again or the button VOLUME COCKPIT
+ or – 2.
Cabin area
To mute the source volume
u press the MUTE button 8.
To cancel muting
press the MUTE button 8 again or
u
the button VOLUME CABIN + or – :
or any other button than the muted
source.
The mute function has no effect during
microphone operation.

Sound setting

Cockpit area
The sound setting for the cockpit area is
performed at the connected radio. For this
purpose, read the operating instructions of
the radio.
Cabin area
To set the bass
u press the BASS +/– button 3 accord-
ingly.
To set the treble
u press the TREBLE +/– button 4 ac-
cordingly.

Microphone announcements

Microphone
announcements
You can connect two microphones to the
CBA47. The inputs (chamber D) are each
fi tted with a switch input.

General

Microphone 1 (driver microphone) has pri-
ority over Microphone 2 (passenger micro-
phone).
Even if the CBA47 is switched off, you can
switch the device on and off using micro-
phone 1.
Microphone announcements are made in
the cabin area.
During an announcement with microphone
1, the selected source is muted. It is not
possible to change the source.
The volume of the microphone announce-
ment is adjusted with the buttons VOLUME
CABIN +/– :.
The adjusted volume is saved.
If a microphone is deactivated, the device
changes back to its original state.

Mix mode

Microphone 2 allows you to perform a mix
mode in the cabin area using the selected
source (karaoke function).
u
Select the desired playback source:
radio, AUX or video.
u
Switch on microphone 2.
(Microphone 1 must be switched off)
u
Adjust the microphone volume with the
buttons VOLUME CABIN +/– :.
15