Setting The 3-Band Equaliser - Blaupunkt BREMEN SQR 46 DAB Operating Instructions Manual

Press the rotary control to change the setting for the selected menu
item.
Turn the rotary control to set the level or frequency.
Press the rotary control to confirm the setting.
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
AMP DELAY
Setting the delay with which a connect amplifier is switched in. Settings: 0.5/
1.0/1.5/2.0/2.5 seconds and OFF (no delay).
Turn the rotary control until the desired delay is set.
Press the rotary control to confirm the setting.

Setting the 3-band equaliser

The radio features a 3-band equaliser. For each of the three treble, middle
and bass bands, you can select a frequency as well as adjust the level. In ad-
dition, you can adjust the quality factor for bass and middle. The equaliser
also provides an adjustable increase of the bass at low volume (X-bass).
Opening the "EQUALIZER" menu
In the "AUDIO" menu, select the "EQUALIZER" menu item.
Press the rotary control to open the menu.
Turn the rotary control to change between the following menu
items:
– EQUALIZER
– EQ TREBLE
– EQ MIDDLE
– EQ BASS
– EQ X-BASS
Note:
The submenus in the "EQUALIZER" menu are not automatically exited
after the last key has been activated. After the setting, press the
MENU button to exit the menu.
23
54
AUTORADIO
EQUALIZER
Switching the equalizer on or off . Settings: ON, OFF.
Turn the rotary control to change the between the settings.
Press the rotary control to confirm the setting.
EQ TREBLE
Adjusting treble frequency and level of the equalizer.
Press the rotary control to open the menu.
Turn the rotary control to change between the following menu
items:
– FREQUENCY (settings: 10/12.5/15/17.5 kHz)
Bedienungsanleitung
– GAIN (settings: –7 to +7)
Press the rotary control to change the setting for the selected menu
Operating instructions
item.
Turn the rotary control to set the level or frequency.
Mode d' emploi
Press the rotary control to confirm the setting.
Press the rotary control to confirm the setting.
Istruzionl of uso
EQ MIDDLE
Adjusting centre frequency and level of the equalizer.
Gebruiksaanwijizing
Press the rotary control to open the menu.
Turn the rotary control to change between the following menu
Bruksanvisining
items:
– FREQUENCY (settings: 0.5/1.0/1.5/2.5 kHz)
– GAIN (settings: –7 to +7)
– Q-FACTOR (settings: 0.5/0.75/1.0/1.25)
Press the rotary control to change the setting for the selected
menu item.
Turn the rotary control to set the level, frequency or Q-factor.
Press the rotary control to confirm the setting.
Sound settings
23