Selecting The Waveband/Memory Bank - Blaupunkt BREMEN MP76 Operating And Installation Manual

Radio mode
• REG: At certain times, some radio sta-
tions divide their programme into re-
gional programmes providing different
content. You can use the REG function
to prevent the car radio from switch-
ing to alternative frequencies that are
transmitting a different regional pro-
gramme content.
Note:
REG must be activated/deactivat-
ed separately in the radio functions
menu.
Switching the RDS function on/off
If you want to use the convenient RDS func-
tions (AF and REG),
u press the TUNER button = in radio
mode.
The display shows the radio function
menu.
u Press the softkey 5 with the display
label "RDS" repeatedly until the de-
sired setting "RDS ON" or "RDS OFF"
appears.
To change back to the basic radio menu,
u press the TUNER button = or the OK
joystick 8.
The settings are saved.
Switching REG on/off
To use the convenient RDS function REG,
u press the TUNER button = in radio
mode.
u Press the NEXT button 4 to display
the second page of the radio function
menu.
18
The display shows the radio function
menu.
u Press the softkey 5 with the display
label "REGIONAL" repeatedly until
"REGIONAL ON" or "REGIONAL OFF"
appears.
u press the TUNER button = or the OK
joystick 8.
The settings are saved.
Selecting the waveband/memory
bank
This device can receive programmes broad-
cast over the FM frequency range as well as
the MW, LW and SW (AM) wavebands. Four
memory banks are available for the FM
waveband and one memory bank each for
the wavebands MW, LW and SW.
In dynamic radio mode, up to fi ve levels are
available.
Six stations can be stored in each memory
bank.
Note:
If your device is set to the region USA,
you can select between the wavebands
FM and AM. In addition, the memory
banks AM1, AM2, and AMT are avail-
able for the AM waveband.
Selecting a waveband
To select an FM, MW, LW or SW waveband,
press the TUNER button = in radio
u
mode.
The display shows the radio function
menu.