Sampling Rate
Flow Sampler Max.
Header
Counter Poller
Enabled
Counter Poller Interval
Buttons
: See description under Owner.
: Click to refresh the page. Note that unsaved changes will be lost.
: Click to save changes. Note that sFlow configuration is not persisted to non-volatile memory.
: Click to undo any changes made locally and revert to previously saved values.
4.17.2 sFlow Status
This page shows receiver and per-port sFlow statistics, screen in
1/Nth of the packets transmitted/received on the port.
Not all sampling rates are achievable. If an unsupported sampling rate is
requested, the switch will automatically adjust it to the closest achievable. This
will be reported back in this field.
The maximum number of bytes that should be copied from a sampled packet to
the sFlow datagram. Valid range is 14 to 200 bytes with default being 128 bytes.
If the maximum datagram size does not take into account the maximum header
size, samples may be dropped.
Enables/disables counter polling on this port.
With counter polling enabled, this specifies the interval - in seconds - between
counter poller samples.
318
User's Manual of XGSW-28040
Figure 4-17-2
appears.