Vlan Setting Example; Two Separate 802.1Q Vlan - Planet XGSW-28040 User Manual

4.6.10 VLAN setting example:


Separate VLAN

802.1Q VLAN Trunk

Port Isolate

4.6.10.1 Two separate 802.1Q VLAN

The diagram shows how the Managed Switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and
VLAN Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive traffic from the
same VLAN members. The screen in
Switches.
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario described as follow:

Untagged packet entering VLAN 2
While [PC-1] transmit an untagged packet enters Port-1, the Managed Switch will tag it with a VLAN Tag=2.
1.
[PC-2] and [PC-3] will received the packet through Port-2 and Port-3.
[PC-4],[PC-5] and [PC-6] received no packet.
2.
Figure 4-6-8 appears and
Figure 4-6-8 two separate VLAN diagram
VID Untagged Members
1 Port-7 ~ Port-10
2 Port-1,Port-2
3 Port-4,Port-5
Table 4-1 VLAN and Port Configuration
123
User's Manual of XGSW-28040
Table 4-6-9 describes the port configuration of the Managed
Tagged Members
N/A
Port-3
Port-6