Planet XGSW-28040 User Manual page 215
24-port gigabit with 4 shared sfp 4-port 10g sfp+ managed switch
Hide thumbs
Also See for XGSW-28040:
- Quick installation manual (12 pages) ,
- Command manual (433 pages)
Table of Contents
Advertisement
IP Fragment
IP Option
SIP Filter
SIP Address
SIP Mask
DIP Filter
DIP Address
DIP Mask
ICMP Parameters
Object
Any: Any value is allowed ("don't-care").
Specify the fragment offset settings for this ACE. This involves the settings for the
More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an
IPv4 frame.
No: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater
than zero must not be able to match this entry.
Yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater
than zero must be able to match this entry.
Any: Any value is allowed ("don't-care").
Specify the options flag setting for this ACE.
No: IPv4 frames where the options flag is set must not be able to match this
entry.
Yes: IPv4 frames where the options flag is set must be able to match this entry.
Any: Any value is allowed ("don't-care").
Specify the source IP filter for this ACE.
Any: No source IP filter is specified. (Source IP filter is "don't-care".)
Host: Source IP filter is set to Host. Specify the source IP address in the SIP
Address field that appears.
Network: Source IP filter is set to Network. Specify the source IP address and
source IP mask in the SIP Address and SIP Mask fields that appear.
When "Host" or "Network" is selected for the source IP filter, you can enter a
specific SIP address in dotted decimal notation.
When "Network" is selected for the source IP filter, you can enter a specific SIP
mask in dotted decimal notation.
Specify the destination IP filter for this ACE.
Any: No destination IP filter is specified. (Destination IP filter is "don't-care".)
Host: Destination IP filter is set to Host. Specify the destination IP address in the
DIP Address field that appears.
Network: Destination IP filter is set to Network. Specify the destination IP
address and destination IP mask in the DIP Address and DIP Mask fields that
appear.
When "Host" or "Network" is selected for the destination IP filter, you can enter a
specific DIP address in dotted decimal notation.
When "Network" is selected for the destination IP filter, you can enter a specific
DIP mask in dotted decimal notation.
Description
215
User's Manual of XGSW-28040
Advertisement
Table of Contents
