Dvd Drives - Gateway Notebook User Manual

The text on the display is dim or difficult to read
■
Adjust the brightness and contrast using the system keys. For more
information, see
■
Change the display settings.
Tips & Tricks
■ Move your notebook away from sources of electrical interference,
such as televisions, unshielded speakers, microwaves, fluorescent
lights, and metal beams or shelves.
The display has pixels that are always dark or too bright
This condition is normal and inherent in the TFT technology used in
active-matrix LCD screens. Gateway's inspection standards keep these to
a minimum. If you feel these pixels are unacceptably numerous or dense
on your display, contact Gateway Customer Care to identify whether a
repair or replacement is justified based on the number of pixels affected.
The display is blank
■ Adjust the brightness using the system keys. For more information,
see "System key combinations" on page 33.
■ Make sure the notebook is not in standby or hibernate mode. For
more information, see
■
The notebook may be sending its display to an external monitor or
projector. Press F
display, an external monitor or projector, or both.

DVD drives

Your notebook does not recognize a disc
■ The disc may not be seated correctly in the tray. When you place a
disc on the tray, make sure that you press the disc firmly onto the
spindle so the retainers hold the disc in place.
■
The modular drive may not be inserted completely into the modular
bay. Press the module into the bay, then try to access the disc again.
"System key combinations" on page
For instructions on changing the display settings, see
"Adjusting the screen and desktop settings" in Using Your
Computer which has been included on your hard drive. To
access this guide, click Start, All Programs, then click
Gateway Documentation.
"Changing power modes" on page
+ F4 several times to toggle through the attached
N
www.gateway.com
Troubleshooting
33.
70.
109