Connecting To A Cable Or Dsl Modem Or To A Wired Ethernet Network - Gateway Computer User Manual

Connecting to a cable or DSL modem or
to a wired Ethernet network
Your computer has a network jack that you can use to connect to a cable or DSL modem
or to a 10/100 wired Ethernet network.
Important
To connect to a cable or DSL modem or to an Ethernet network:
1
Insert one end of the network cable into the network jack
computer.
2
Insert the other end of the network cable into a network jack.

Connecting to a cable or DSL modem or to a wired Ethernet network

Your computer is equipped with a built-in Ethernet port. For
information about setting up a wired or wireless Ethernet network, see
"Networking Your Computer" on page
www.gateway.com
77.
on the back of your
31