Outgoing Message - BT RESPONSE 5 User Manual

Switching the answering
machine on and off
To switch on
ANSWER
ON/OFF
Press and release the
•
button, your Response 5
ON/OFF
will beep and the red LED will
come on.
To switch off
ANSWER
ON/OFF
Press and release the
•
button. Your Response 5
ON/OFF
will beep before resetting the tape.
The red goes out and then
LED
your Response 5 is switched off.
Turning your Response 5 off does not
delete messages. They will be saved for
playback at a later time.

Outgoing message

The outgoing message is the message
a caller hears when your Response 5
answers a call. It is supplied with
the following pre-recorded outgoing
message: 'Hello. Your call cannot be
taken at the moment, so please leave
your message after the tone'. This
message can be kept as your
outgoing message, or if you prefer,
ANSWER
ANSWER
you can replace it by recording
your own message.
Please note
Once you have recorded over the
pre-recorded message it is permanently
erased and you will not be able to
return to it.
To record your own outgoing
message
OGM
Press and hold down the
•
button for about 10 seconds, until
you hear a long beep.
Then release the
•
Your outgoing message can be up to 30
seconds long.
Record your message – from 5
•
to 30 seconds long. Speak clearly,
about 15-30 cm from the
microphone.
Press the
• SAVE/STOP
end recording. Your Response 5
will automatically rewind and play
the message back to you.
Please note
Remember to end the recording by
pressing the
SAVE/STOP
The machine is now ON and ready
to take messages.
Using your Response 5
OGM
button.
OGM
button to
button.
8