Using The Answering Machine; Selecting The Answering Machine Mode; To Use The Pre-Recorded Outgoing Message - BT Paragon 200 User Manual

Using the answering machine

Selecting the answering
machine mode
To switch the answering machine on, off
and to Answer Only
Setting
On
Off
Answer Only
To set to any of the above settings press and
release the Answer On/Off button until the
prompt announces your required setting.
NB: You will not lose messages when switching
between these settings.
12
Paragon 200 - Edition 4.3 – 26th Sept '00
Description Display
Receives incoming Number of
calls and records messages eg.
messages. 00 or 01 etc.
Does not record Screen is
messages. blank
Will play your
AO
outgoing message
but will not record
messages.
To use the pre-recorded
outgoing message
When your answering machine is switched on,
the pre-recorded message will automatically
greet callers with:
"Hello, your call cannot be taken at the moment,
so please leave your message after the tone."
Callers can skip this message by pressing the
button and record their message after the tone.
The pre-recorded message remains in the memory
and you can always choose to use it again.
Default for Answer Only Outgoing Message.
"Hello, your call cannot be taken and you cannot
leave a message. So please call back later."
To listen to and switch between the male
and female pre-recorded Out Going
Message (OGM)
Press buttons in the order shown
Press and release until the display
Sel
shows OGM.
Play
Default is played.
memo
Press either button during playback to
switch between a male or female voice
for your OGM message.
#