Installing The Print Cartridge - BT IMAGE 2000 User Manual

To help prevent paper jams and misfeeds, f lick your
thumb across the bottom edge of each stack of paper
before you insert it into the machine.
Warning
Make sure that the protective foam strip is removed
from the machine's paper tray before inserting the
paper.
Pull the paper tray lever towards the front of
•
the machine. The paper is held in place and
the display shows NO INK CARTRIDGE and
PRESS SET UP.
Special papers
Please note that care should be taken when printing
on glossy or silk paper as the ink may take longer to
dry than when using standard multi-purpose paper.
It is recommended that only standard multi-purpose
paper is used for receiving faxes.

8 Installing the print cartridge

Unwrap the cartridge carefully.
Do not touch the metal contacts.
Always hold the cartridge by the black areas
or coloured top only. (A black ink cartridge
will have a white top whilst a colour ink
cartridge will have a blue top.)
To install the print cartridge
Press the
•
CARTRIDGE.
Press the
•
holder is moved into the load position and
the display shows TICK TO FINISH.
paper tray lever
Release button
Open the front cover by pressing the two
•
release buttons either side of the Image 2000.
SET UP
STOP
button to display REPLACE
SET UP
button. The print cartridge
Setting up
Release button
7