One Touch Name And Numbers - BT IMAGE 2000 User Manual

Setting the speaker volume
Your Image 2000 has an built-in speaker that
enables you to monitor the progress of a fax or
phone call.
The speaker has three settings:
, .
MEDIUM HIGH
To set the volume
Press the button.
•
Adjust the volume of the dial tone to
•
or using the
MEDIUM HIGH
buttons.
When the volume is set, press the
•
button.
Press to return to standby, or dial a
• STOP
number.
When you set your Image 2000 to HIGH or LOW,
the machine gives two beeps.
One-touch names and
numbers
You can store a name, fax and phone number
under each of the one-touch buttons.
,
LOW
To store one-touch names and numbers.
Press the
•
STOP
shows ONE TOUCH SET UP.
Press the
•
TOUCH SET UP. SELECT ONE-TOUCH KEY.
,
LOW
Press the
•
or
Display shows the one-touch button number
and ENTER NAME. You can now enter a
name. If a name has been previously
entered, the display shows EDIT NAME.
(See page : To edit one-touch names and
numbers)
You can enter a name of up to 20 characters.
For example, to enter the name JOHN:
Press the
•
Press the
•
Press the
•
Press the
•
Use the
display. Use the
If you pause for more than one minute when
entering your ID, your Image 2000 will
automatically revert to standby and any changes you
have made will NOT be saved.
SET UP
button until the display
SET UP
button. Display shows ONE
button you want.
ONE-TOUCH
button until the display shows J
5
button until the display shows O
6
button until the display shows H
4
button until the display shows N
6
button to move forward through the
button to delete characters.
Using the telephone,
fax and copier
STOP
15