Setting The Ring Response - BT IMAGE 2000 User Manual

Additional features

Setting the ring response

The ring response is the time that your Image
2000 allows before answering a call. You can
set between one and nine rings.
To set the AUTOFAX ring response
This is the number of rings after which your
Image 2000 will answer a call when set to
AUTOFAX. The pre-set number of rings is 1.
SET UP
Press the
• SET UP
shows USER SET UP.
Press the
•
USER INFORMATION
Press the
•
SET LINE PARAMETERS.
Press the
•
ANSWER RESPONSE
Press the
•
AUTOFAX RESPONSE
Press the
•
RESPONSE ≈ 1 RING.
Use the keypad to enter the number of rings
•
you want between
Press the
•
Press the
• STOP
50
STOP
button until the display
button. Display shows SET
.
button until the display shows
button. Display shows AUTO
.
button. Display shows
.
button. Display shows RING
and .
1 9
button to confirm the setting.
button to return to standby.
To set the ANS/FAX ring response
This is the ring response when your Image
2000 is used with an answering machine. To
ensure that your Image 2000 works with an
answering machine, the answering machine
must always answer a call before the Image
2000. Therefore, the number of rings set on
the answer machine must be fewer than those
set on your Image 2000.
If the answering machine is switched off, your
Image 2000 will answer calls after the number
of rings you have set for the ANS/FAX mode.
The pre-set number of rings for ANS/FAX
mode is 8 and you will not normally need to
change this. If you do need to change it:
SET UP
Press the button until the display
• SET UP
shows USER SET UP.
button. Display shows SET
Press the
•
USER INFORMATION
.
Press the button until the display shows
•
SET LINE PARAMETERS.
button. Display shows AUTO
Press the
•
ANSWER RESPONSE.
Press the button. Display shows
•
AUTOFAX RESPONSE.
button to display ANS/FAX
Press the
•
RESPONSE.
button. Display shows RING
Press the
•
RESPONSE ≈ 8 RINGS.
STOP