Connecting To A Switchboard - BT IMAGE 2000 User Manual

Additional features
SET UP
56
Connecting to a
switchboard
If you want to connect your Image 2000 to a
switchboard (also known as a PBX), you can
take advantage of its PBX mode. This allows
you to set the line access code under one
button and the machine will, if required,
automatically insert a pause after the access
code when dialling an outside number. You
may also need to change the dialling mode.
To set PBX mode
Press the button until the display
• SET UP
shows USER SET UP.
button. Display shows SET
Press the
•
USER INFORMATION.
If you stored your access code under the # or*
Press the button until the display shows
•
button, then, when you make a call, if the line
SET LINE PARAMETERS.
access button is the first button you press, the line
button. Display shows AUTO
Press the
•
access code will be dialled. If you press the line
ANSWER RESPONSE.
access button after another button, it will send its
button to display DIRECT LINE or
Press the
•
normal signal.
PBX.
Press the button.
•
button to display PBX.
Press the
•
button. Display shows SET
Press the
•
ACCESS CODE. PBX mode is now set and you
can now enter a line access code if required.
You can also set the recall mode.