Sheet Feeder - BT IMAGE 2000 User Manual

Setting up
4 Plug the mains power cable
into the base
base unit
Power cable
Push the plug in firmly to ensure it is fully
inserted.
5 Now plug the mains cable into
a convenient 13 amp mains
power socket
Once connected to the mains your Image 2000
will beep and the display shows WARMING
UP. . . PLEASE WAIT A MOMENT before changing
OUT OF PAPER
to show
6 Connection to a PC
6
FILL PAPER HOLDER
and
When running Windows 95 (or above) your PC
may prompt you to install the necessary software.
Please follow the instructions in the Unimessage
user guide.
See also "Connecting to a PC for faxing,
scanning and printing" on page 55 of this
guide.
7 Load paper into the automatic

sheet feeder

Your Image 2000 prints onto plain paper. It will
hold up to 100 sheets of A4 75gsm paper
(210x297mm)
.
Extend the paper support.
•
Push the paper tray lever towards the back
•
of the machine.
Insert the paper.
•
Adjust paper guides to the size of the paper.
•
paper tray lever